What you enter stays on this device.
Running pace is the time taken to cover one mile or one kilometre, found by dividing the time by the distance: a 5K in 25 minutes is a pace of 5:00 per km, or 8:02.8 per mile, a speed of 12 km/h.
Pace per mile and per kilometre
Pace is the time it takes to cover one mile or one kilometre, and in the UK runners talk in both units, so this calculator always gives both. Pace is simply time divided by distance. A 5K in 25 minutes gives 25 ÷ 5 = 5 minutes, so 5:00 per km. A mile is 1.609344 km, so the same run works out at 8:02.8 per mile. Speed is the other way round: 12 km/h, or 7.46 mph.
Any two of distance, time and pace give you the third. The ‘Pace’ tab works from distance and time. ‘Time’ takes the distance and the pace you plan to run: at 5:30 per km, a 10K takes 55:00. ‘Distance’ tells you how far a run of fixed length takes you, so an hour at 6:00 per km covers 10 km. The results show pace per mile and per kilometre, speed in mph and km/h, and splits every kilometre, every 5 km or every mile. Choose ‘min/mile’ in the pace list to type a mile pace directly.
Marathon pace chart, from 3:00 to 5:00
The marathon is 42.195 km, the length set by Technical Rule 55.1 of World Athletics, which makes it 26.22 miles. Breaking four hours means holding 9:09.2 per mile, or 5:41.3 per km, which is 10.55 km/h; at that pace you pass halfway in 2:00:00 and 30 km in 2:50:38. For 3:30 the pace is 8:00.6 per mile. Each row assumes an even pace from start to finish.
| Target | Pace (min/km) | Pace (min/mile) | Speed (km/h) | 10K split | Half split | 30K split |
|---|---|---|---|---|---|---|
| 3:00 | 4:16 | 6:51.9 | 14.07 | 42:40 | 1:30:00 | 2:07:59 |
| 3:15 | 4:37.3 | 7:26.2 | 12.98 | 46:13 | 1:37:30 | 2:18:39 |
| 3:30 | 4:58.6 | 8:00.6 | 12.06 | 49:46 | 1:45:00 | 2:29:18 |
| 3:45 | 5:19.9 | 8:34.9 | 11.25 | 53:19 | 1:52:30 | 2:39:58 |
| 4:00 | 5:41.3 | 9:09.2 | 10.55 | 56:53 | 2:00:00 | 2:50:38 |
| 4:30 | 6:23.9 | 10:17.9 | 9.38 | 1:03:59 | 2:15:00 | 3:11:58 |
| 5:00 | 7:06.6 | 11:26.5 | 8.44 | 1:11:06 | 2:30:00 | 3:33:18 |
Rounding matters at the sharp end. The exact pace for a three-hour marathon is 255.95 seconds per km, which the calculator shows as 4:16. Run exactly 4:16 per km all the way, though, and you finish in 3:00:02. On top of that, the same rule has courses measured along the shortest possible route, and nobody runs that line perfectly, so you always cover a little more than 42.195 km. If you are chasing a time, run slightly quicker than the chart.
Half marathon pace
The half marathon is exactly half a marathon, 21.0975 km or 13.11 miles. A two-hour half needs the same pace as a four-hour marathon, 9:09.2 per mile, and passes 10 km in 56:53. For 1:50 you need 5:12.8 per km, or 8:23.5 per mile; for 1:45, 8:00.6 per mile. The chart gives the 5K, 10K and 15K splits as well.
| Target | Pace (min/km) | Pace (min/mile) | Speed (km/h) | 5K split | 10K split | 15K split |
|---|---|---|---|---|---|---|
| 1:30 | 4:16 | 6:51.9 | 14.07 | 21:20 | 42:40 | 1:03:59 |
| 1:40 | 4:44.4 | 7:37.7 | 12.66 | 23:42 | 47:24 | 1:11:06 |
| 1:45 | 4:58.6 | 8:00.6 | 12.06 | 24:53 | 49:46 | 1:14:39 |
| 1:50 | 5:12.8 | 8:23.5 | 11.51 | 26:04 | 52:08 | 1:18:12 |
| 2:00 | 5:41.3 | 9:09.2 | 10.55 | 28:26 | 56:53 | 1:25:19 |
| 2:15 | 6:23.9 | 10:17.9 | 9.38 | 32:00 | 1:03:59 | 1:35:59 |
| 2:30 | 7:06.6 | 11:26.5 | 8.44 | 35:33 | 1:11:06 | 1:46:39 |
Converting speed to pace
A treadmill shows speed; a running watch shows pace. To go from km/h to minutes per km, divide 60 by the speed: 12 km/h gives 60 ÷ 12 = 5 minutes, so 5:00 per km. 10 km/h is 6:00 per km and 15 km/h is 4:00. Some treadmills display mph instead, so the last column gives the mph figure too. In the calculator, pick ‘km/h’ or ‘mph’ from the pace units to type a speed.
| Speed | Pace (min/km) | Pace (min/mile) | Speed (mph) |
|---|---|---|---|
| 8 km/h | 7:30 | 12:04.2 | 4.97 |
| 9 km/h | 6:40 | 10:43.7 | 5.59 |
| 10 km/h | 6:00 | 9:39.4 | 6.21 |
| 11 km/h | 5:27.3 | 8:46.7 | 6.84 |
| 12 km/h | 5:00 | 8:02.8 | 7.46 |
| 13 km/h | 4:36.9 | 7:25.7 | 8.08 |
| 14 km/h | 4:17.1 | 6:53.8 | 8.70 |
| 15 km/h | 4:00 | 6:26.2 | 9.32 |
| 16 km/h | 3:45 | 6:02.1 | 9.94 |
| 18 km/h | 3:20 | 5:21.9 | 11.18 |
| 20 km/h | 3:00 | 4:49.7 | 12.43 |
For training paces, the better starting point is a fitness test: the Cooper test calculator turns the distance you cover in 6 or 12 minutes into easy, threshold and interval paces. This page answers a different question: what pace a given distance and time require. For miles, yards and feet, the unit converter handles the arithmetic, and the energy a training week burns goes into the daily calorie calculator.
Predicting race times with the Riegel formula
In 1981, Peter Riegel, a research engineer at the Battelle institute in Ohio, published in American Scientist a link between time and distance in world records: T2 = T1 × (D2 ÷ D1) to the power b. The exponent b measures how much you slow down as the distance grows. Using the records as of 1 November 1979, Riegel found 1.077 for men's running, 1.083 for women's, and 1.05 to 1.06 for men from over 40 to over 70. The value 1.06 is the one most online calculators use; this one uses it by default and shows the result with 1.08 alongside.
From a 25-minute 5K, Riegel gives 52:07 for 10K and 1:55:00 for the half. For the marathon it gives 3:59:47, which looks like a sub-four, but sits outside the 230-minute range the formula was fitted on. From 50:00 for 10K, the half comes out at 1:50:19.
| 10K time | 5K (predicted) | Half (1.06) | Half (1.08) | Marathon (1.06) | Marathon (1.08) |
|---|---|---|---|---|---|
| 40:00 | 19:11 | 1:28:15 | 1:29:35 | 3:04:00 | 3:09:23 |
| 45:00 | 21:35 | 1:39:17 | 1:40:47 | 3:27:01 | 3:33:03 |
| 50:00 | 23:59 | 1:50:19 | 1:51:59 | 3:50:01* | 3:56:44* |
| 55:00 | 26:23 | 2:01:21 | 2:03:11 | 4:13:01* | 4:20:24* |
| 1:00:00 | 28:47 | 2:12:23 | 2:14:23 | 4:36:01* | 4:44:05* |
Treat these numbers as estimates. Riegel fitted the formula to efforts of about 3.5 to 230 minutes and races of 1.5 to 42.2 km, and the chart marks anything outside that range with an asterisk. It also assumes you have trained for the distance: without long runs, the last miles of a marathon will be slower than predicted. Heat, hills and wind are not part of it.
Swimming pace per 100 metres
Swimmers count in minutes per 100 m. Choose ‘metres’ as the distance unit or ‘min/100 m’ as the pace unit, and the calculator shows pace per 100 m with splits every 100 or 500 m. A 400 m swim in 6:00 is 1:30 per 100 m; at that pace, 1,500 m takes 22:30.
| Pace per 100 m | 400 m | 1,000 m | 1,500 m | 2,000 m |
|---|---|---|---|---|
| 1:30 | 6:00 | 15:00 | 22:30 | 30:00 |
| 1:45 | 7:00 | 17:30 | 26:15 | 35:00 |
| 2:00 | 8:00 | 20:00 | 30:00 | 40:00 |
| 2:15 | 9:00 | 22:30 | 33:45 | 45:00 |
| 2:30 | 10:00 | 25:00 | 37:30 | 50:00 |
There is no Riegel prediction for swimming: his paper gives swimmers a different exponent, 1.03, based only on records from 400 to 1,500 m.
Rounding, distances and sources
Everything is worked out in seconds with no rounding along the way. On screen, pace is rounded to the nearest tenth of a second with carrying, so 4:59.96 shows as 5:00 and never 4:60. Times are rounded to the second and speeds to two decimals. A mile is 1,609.344 m, the road mile in the World Athletics rules. To turn a time into decimal hours, 4:30 being 4.5 hours, use the time converter. Your calculations stay in ‘My runs’ on this device, with a chart of your pace, and the result link reopens the same calculation on another phone.
Method and sources
References used:
- World Athletics, Competition Rules & Technical Rules (C1.1 & C2.1), version of 1 July 2026, Technical Rule 55.1: road race distances (road mile 1,609.344 m, marathon 42.195 km)
- Riegel P. S., Athletic records and human endurance, American Scientist 69(3), 1981, pp. 285-290
This tool is checked by automated tests against known cases. Spotted a mistake? Report it on the contact page.
Last updated