Skip to content

Work out a percentage change

Percentage change is worked out as (new value − old value) ÷ old value × 100. From 80 to 100 is a rise of 25%; from 100 back to 80 is a fall of only 20%.

Work out another change

Percentage change examples

OldNewChange
80100+25%
10080−20%
5075+50%
7550−33.33%
1,2501,400+12%
1,4001,250−10.71%
33.5+16.67%
200150−25%
40100+150%
10040−60%

The first table shows it row by row: the same gap gives a different percentage depending on the starting point. To chain two changes, multiply their multipliers rather than adding the rates: +10% then +10% gives +21% in total, and +10% then −10% gives −1%.

What rise undoes a fall?

FallRise neededRise then fall by the same %
−5%+5.26%−0.25%
−10%+11.11%−1%
−20%+25%−4%
−25%+33.33%−6.25%
−30%+42.86%−9%
−40%+66.67%−16%
−50%+100%−25%
−75%+300%−56.25%

After a 20% fall, it takes a rise of 25% to get back to where you started, because the rise applies to a smaller value. The other way round, +20% then −20% leaves you 4% below the start.

Points or percent?

When the value you follow is itself a percentage, the difference is counted in percentage points. A rate going from 3% to 3.5% gains 0.5 points, but rises by 16.67% in relative terms.

Method and sources

This tool is checked by automated tests against known cases. Spotted a mistake? Report it on the contact page.

Last updated