Skip to content

Metric conversion chart: length, mass, capacity, area and volume

A metric conversion chart lines units up in columns, largest on the left. Pick a quantity, enter the number and both units, and the tool places each digit and reads off the answer.

What you enter stays on this device.

Converting metric units comes down to moving the decimal point: each step to the next unit multiplies or divides by 10 for length, mass and capacity, by 100 for area and by 1,000 for volume.

Metric length conversion chart from kilometres to millimetres: each column to the right multiplies by 10, to the left divides by 10; for areas you multiply by 100 and for volumes by 1,000. Example: 3.5 m is 350 cm.

3.5 m to cm, column by column

On a metric conversion chart for length, each column is worth ten times the one to its right. Write the number so that its ones digit sits under the unit you start from, then read the answer under the unit you want.

  1. The 3 of 3.5 m goes under m and the 5 under dm.
  2. You want centimetres. The cm column is empty, so it gets a 0.
  3. The decimal point goes straight after the cm column. That reads 350, so 3.5 m = 350 cm.

km | hm | dam | m | dm | cm | mm

The other way round, from 5 m to km, the zeros go in front. The decimal point follows the km column, hm and dam get a 0 each, and you end up with 0.005 km.

Where people slip up

  • Skipping the unnamed column for mass. Between the quintal (100 kg) and the kilogram sits the tens-of-kilograms column, which has no name of its own; leave it out and every digit shifts one place.
  • One digit per box for area: 1.5 m² is 150 dm², not 15.
  • Mixing up the zeros of the number with the ones you add. In 0.07 kg = 70 g, only the zero in the g column is added.
  • Trusting a computer calculator with 1.15 × 100. Many show 114.99999999999999 because they work in binary. The tool moves the decimal point on the digits themselves and gives exactly 115 cm.

Area and volume: 2 and 3 digits per box

A square 1 m on each side holds 10 rows of 10 squares of 1 dm. Hence 1 m² = 100 dm², and every box on the area chart takes two digits. A cube with 1 m edges holds 10 × 10 × 10 cubes of 1 dm, which gives three digits per box and 1 m³ = 1,000 dm³.

Farmland is usually measured in hectares (1 hm², 10,000 m²), and the are (1 dam², 100 m²) still turns up in some countries. Volume and capacity meet at 1 dm³ = 1 L and 1 cm³ = 1 mL, so 2 L is 2,000 cm³ and a cubic metre holds 1,000 L.

Metric conversion tables

Each row gives the value of 1 unit in the reference unit. For any other amount, multiply: 3 hm = 3 × 100 m = 300 m.

Length

Unitin min cm
1 km1,000 m100,000 cm
1 hm100 m10,000 cm
1 dam10 m1,000 cm
1 m1 m100 cm
1 dm0.1 m10 cm
1 cm0.01 m1 cm
1 mm0.001 m0.1 cm

Mass

Unitin kgin g
1 t1,000 kg1,000,000 g
1 q100 kg100,000 g
1 kg1 kg1,000 g
1 hg0.1 kg100 g
1 dag0.01 kg10 g
1 g0.001 kg1 g
1 dg0.0001 kg0.1 g
1 cg0.00001 kg0.01 g
1 mg0.000001 kg0.001 g

Capacity

Unitin Lin mL
1 kL1,000 L1,000,000 mL
1 hL100 L100,000 mL
1 daL10 L10,000 mL
1 L1 L1,000 mL
1 dL0.1 L100 mL
1 cL0.01 L10 mL
1 mL0.001 L1 mL

Area

Unitin m²
1 km²1,000,000 m²
1 hm² (1 ha)10,000 m²
1 dam² (1 a)100 m²
1 m² (1 ca)1 m²
1 dm²0.01 m²
1 cm²0.0001 m²
1 mm²0.000001 m²

Volume

Unitin m³in L
1 m³1 m³1,000 L
1 dm³0.001 m³1 L
1 cm³0.000001 m³0.001 L
1 mm³0.000000001 m³0.000001 L

Key equivalents

1 m³1,000 L
1 dm³1 L
1 cm³1 mL
1 L1,000 cm³
1 hL100 L
1 ha10,000 m²
1 a100 m²
1 t1,000 kg
1 q100 kg

The chart sticks to metric units; inches, feet and pounds need a separate converter. To work out a quantity before converting it, try the square footage calculator, the volume calculator or the volume of a cylinder.

Method and sources

References used:

This tool is checked by automated tests against known cases. Spotted a mistake? Report it on the contact page.

Last updated

Frequently asked questions

Metres to millimetres: how many zeros?
Three, one per column (dm, cm, mm). 2 m = 2,000 mm.
How many litres are in a cubic metre?
A thousand. A cubic metre is 1,000 dm³, and each dm³ is a litre.
What if I need hectares in m²?
1 ha = 10,000 m², a square 100 m on each side. Choose “Area” in the tool, where hectares and ares appear as ha and a.
Why does the area chart have 2 digits per box?
Because each area unit is 100 times the next one down, not 10. A square 1 m on each side splits into 10 rows of 10 squares of 1 dm. That makes 100 dm² in 1 m². With a single digit per box you would be out by a factor of 10 at every column.
250 cm is how many metres?
2.5 m: you divide by 100 by moving the decimal point two places left, which also turns 7 cm into 0.07 m.
How many cL and mL are in a litre?
100 cL or 1,000 mL, so a 33 cL can holds 330 mL.
Can m² be turned into m³?
Not directly, as a dimension is missing. 20 m² of floor with a 2.5 m ceiling gives 50 m³.