What you enter stays on this device.
The volume of a box shape in cubic metres is its length times its width times its height in metres, and one cubic metre holds 1,000 litres, so a crate measuring 2 m × 1 m × 0.5 m is 1 m³.
Six shapes, six formulas
With a volume calculator or by hand, a cuboid or a cylinder comes down to the area of the base times the height. Cones and pyramids take a third of that, and the sphere has a formula of its own.
| Shape | Formula |
|---|---|
| Cube | side³ |
| Cuboid | length × width × height |
| Cylinder | π × radius² × height |
| Cone | π × radius² × height ÷ 3 |
| Pyramid (rectangular base) | length × width × height ÷ 3 |
| Sphere | 4/3 × π × radius³ |
Three volumes worked through
A tank measuring 2 m × 1.5 m × 0.5 m holds 2 × 1.5 × 0.5 = 1.5 m³, or 1,500 litres.
A rectangular pool 8 m × 4 m with an average depth of 1.5 m holds 48 m³, which is 48,000 litres. The real amount of water is a little less, as nobody fills a pool to the brim and the walls take up space.
A ball with a 10 cm radius has a volume of 4/3 × π × 10³ ≈ 4,189 cm³, about 4.19 litres. If you measured a 20 cm diameter, halve it before entering the radius.
Volume of a rectangular pool by depth
Volume in m³ and in litres for a pool of a given length × width and an average depth of 1 to 1.5 m. An 8 × 4 m pool filled to 1.2 m holds 38.4 m³, or 38,400 litres.
| Pool | Depth 1 m | Depth 1.2 m | Depth 1.5 m |
|---|---|---|---|
| 3 × 2 m | 6 m³ (6,000 L) | 7.2 m³ (7,200 L) | 9 m³ (9,000 L) |
| 4 × 2 m | 8 m³ (8,000 L) | 9.6 m³ (9,600 L) | 12 m³ (12,000 L) |
| 5 × 2.5 m | 12.5 m³ (12,500 L) | 15 m³ (15,000 L) | 18.75 m³ (18,750 L) |
| 6 × 3 m | 18 m³ (18,000 L) | 21.6 m³ (21,600 L) | 27 m³ (27,000 L) |
| 8 × 4 m | 32 m³ (32,000 L) | 38.4 m³ (38,400 L) | 48 m³ (48,000 L) |
| 10 × 5 m | 50 m³ (50,000 L) | 60 m³ (60,000 L) | 75 m³ (75,000 L) |
Cones and pyramids: one third
A cone holds exactly a third of the cylinder with the same base and height. With a 3 cm radius and 4 cm height, the cylinder is about 113.10 cm³ and the cone 37.70 cm³. Pyramids follow the same rule against cuboids, so a pyramid with a 3 m × 3 m base and 4 m height contains 12 m³, against 36 m³ for the cuboid.
The cubed-units trap
Going from centimetres to metres divides a length by 100, but a volume by 1,000,000 (100 × 100 × 100). A cube with 100 cm sides is therefore 1 m³, not 100. The tool converts every measurement to metres before calculating to avoid that slip.
From m³ to litres, gallons and cubic feet
For litres, remember that 1 m³ = 1,000 L and 1 L = 1 dm³ = 1,000 cm³. Watch out with gallons: a UK gallon is larger than a US one. For other units, converting m³ to litres, dm³ or cm³ with a place-value chart stops you losing a zero.
| Unit | Equals |
|---|---|
| 1 m³ | 1,000 litres |
| 1 dm³ | 1 litre |
| 1 litre | 1,000 cm³ = 1,000 ml = 100 cl |
| 1 cm³ | 1 ml = 0.001 litres |
| 1 UK (imperial) gallon | 4.546 litres |
| 1 US gallon | 3.785 litres |
| 1 cubic foot (ft³) | 28.317 litres |
For the same room you may also want its floor area. For a round tank or a pipe, use the cylinder volume calculator.
Method and sources
References used:
This tool is checked by automated tests against known cases. Spotted a mistake? Report it on the contact page.
Last updated