Skip to content

Square footage and square metre calculator

For most rooms, area is simply length × width. This square footage calculator also covers triangles, circles and trapeziums, and its “Several rooms” tab adds up a whole flat or house, room by room.

What you enter stays on this device.

The area of a rectangular room is its length multiplied by its width; with measurements in metres the result is in square metres, and 1 m² equals about 10.76 square feet.

Two floor plans: a 4 m by 3 m rectangular room divided into 1 m² squares, so 12 m²; an L-shaped room split into two rectangles of 8 m² and 4 m², 12 m² in total.

One formula per shape

A square footage calculator only needs every measurement in the same unit. The tool converts them to metres first, then shows the area in m² and in square feet. Feet, inches, metres and centimetres are all accepted.

ShapeFormulaExample
Rectanglelength × width4 m × 3.5 m = 14 m²
Trianglebase × height ÷ 26 m × 4 m ÷ 2 = 12 m²
Circleπ × radius²radius 2 m: ≈ 12.57 m²
Trapezium(a + b) ÷ 2 × h(3 + 5) ÷ 2 × 4 = 16 m²

For a circle you start from the radius, which is half the diameter. A round table 1.2 m across has a 0.6 m radius and takes up about 1.13 m².

Floor, wall, garden: three worked examples

An L-shaped living room

Split it into rectangles and add them up. A 4 × 3.5 m living room with a 3 × 3 m alcove and a 2.5 × 2 m hallway comes to 14 + 9 + 5 = 28 m². The “Several rooms” tab does exactly that sum.

A wall to paint

Width times height, then take off the openings. A 4 m by 2.5 m wall is 10 m²; with a 0.9 × 2.1 m door (1.89 m²) that leaves 8.11 m². The tin tells you how many m² a litre covers, so divide the area by that figure and multiply by the number of coats. For tiles or flooring, the supplier often suggests an allowance for offcuts, so add that percentage of waste to the area before you order.

A plot or garden

A rectangular plot of 25 m by 40 m covers 1,000 m², or about a quarter of an acre. For an awkward shape, break it into rectangles and triangles. Measure a triangle's height at right angles to its base, not along one of its sides.

Floor area of a rectangular room by side length

Area in m² for a length (row) and a width (column) in metres: a room measuring 4.5 m by 3.5 m covers 15.75 m².

Length2 m2.5 m3 m3.5 m4 m5 m
2.5 m56.257.58.751012.5
3 m67.5910.51215
3.5 m78.7510.512.251417.5
4 m81012141620
4.5 m911.2513.515.751822.5
5 m1012.51517.52025
6 m121518212430

Square feet, inches and centimetres

Areas convert by the square of the length factor. A 10 ft × 12 ft bedroom is 120 sq ft, which is 11.15 m². Going the other way, multiply square metres by about 10.764, so a 14 m² room is roughly 150.7 sq ft.

The same logic applies to centimetres. Since 1 m = 100 cm, 1 m² = 100 × 100 = 10,000 cm², and a 50 cm × 40 cm board is 2,000 cm², or 0.2 m².

UnitEquivalent in m²
1 cm²0.0001 m²
1 square foot (ft²)0.0929 m²
1 square yard (yd²)0.8361 m²
1 are (a)100 m²
1 acre4,046.86 m²
1 hectare (ha)10,000 m² (about 2.47 acres)
1 km²1,000,000 m² (100 ha)

Floor area for a sale or let

The result is a geometric floor area. Official figures used for selling or letting a property follow their own measuring rules, for instance on low ceilings and wall thickness, so rely on a proper survey for those.

Next steps for a building project: the volume of a room in m³ for heating, or the metric conversion chart to turn m² into ares or cm².

Method and sources

References used:

This tool is checked by automated tests against known cases. Spotted a mistake? Report it on the contact page.

Last updated

Frequently asked questions

How do I work out the square footage of a room?
Length times width: a 10 ft × 12 ft room is 120 sq ft.
How many cm² are in a square metre?
10,000, because it is 100 cm × 100 cm.
What if the room is L-shaped?
Split it into two rectangles, work out each one and add them. The “Several rooms” tab does the adding for you.
A 25 m × 40 m plot: how many acres is that?
About 0.25 acres, since it covers 1,000 m² and an acre is 4,046.86 m².
Should I take windows off when measuring a wall to paint?
Yes, and doors too. Work out the whole wall, then subtract each opening. A 4 × 2.5 m wall (10 m²) with a 0.9 × 2.1 m door (1.89 m²) leaves 8.11 m². Multiply by the number of coats to estimate the paint.
Can I mix feet and inches?
Not in the same calculation. Convert everything to inches first (5 ft 6 in is 66 in) or pick metres, then enter all the measurements in that unit.
How do I convert m² to square feet?
Multiply by 10.7639: 14 m² is about 150.7 sq ft.